Applications:

Used to fix a wide variety of Siniat Boards to metal studs. Please note the below when using Siniat Performance Self Tapping Screws:

• Screws to be located a minimum of 10mm from bound edges and 13mm from cut edges
• Screw location to be a minimum of 3mm from the edge of the metal stud
• Screw depth into the metal stud must be a minimum of 10mm

Benefits:

• For use with thin gauge metal studwork (under 0.7mm thick)
• Used to attached Siniat Performance boards such as Siniat LaDura, dB, Megadeco and Universal boards to metal studs
• Fine threaded screw
• Phillips head
• Carbon steel screws with Zinc Coating
• Manufactrured to BS EN 14566