Bedroom Solutions

Go to:

Choices for your bedroom

Siniat Standard board provides a simple, lightweight and cost-effective boarding solution. However, there are many occasions when additional requirements need to be met. Our range of Performance boards meet these needs, with some meeting several needs in a single board.

A single board such as LaDura will provide sound reduction, fire protection and is so strong it can take the weight of up to 80Kg with a higher resilience to wear and tear. 
See below for our range of solutions.

Solutions for bedrooms

Show more Show less Load Fixing and Impact Solution

Overview

Our GTEC LaDura board is one of our strongest boards and has been tried and tested to take the weight of modern everyday fixtures and fittings.  TVs, sound systems, shelving and more.  In fact any weight up to 80Kg.

Due to its high strength and durability LaDura board is also commonly also used in areas which are subject to higher levels of knocks and bumps such playrooms and even schools and hospitals.


Installation:

  • Dot and Dab
  • Drylining 
  • Metal stud or timber partition

Advantages

  • High strength and durability.
  • Excellent fire, sound, impact and moisture resistant, meaning one board does it all.
  • Able to support weights  of up to 80Kg. Enabling you to secure shelves, TVs, speakers and other wall fixtures.
  • Installed in the same way as standard plasterboard.

Key Specification:
  • Available in either 12.5 mm or 15 mm
  • Fire resistance 12.5 mm = 30 minutes, 15 mm = 60 minutes
  • Sound resistance 12.5 mm up to 48RwdB*


 *Based on an installation comprising of LaDura Board mounted to
70 mm GTEC metal studs and 25 mm of 16kg/m3 of mineral wool.

Our product
Show more Show less Noise Reduction Systems

Overview

Modern living has introduced a wide range of home entertainment systems into every room.  Sound pollution within the home is becoming increasingly difficult to manage.

Our noise reduction systems give you the ability to control the sound levels around your home, creating a more comfortable environment for everyone.

Installation
The type and quality of installation can have a huge impact on the performance of a noise reduction system. The combination of metal stud and mineral wool will ensure the correct sound resistance is achieved. Installation methods are:
  • Metal stud partition.
  • Metal drylining system.
  • Single and double layer dB Board.

Advantages

  • Up to 46RwdB sound resistance from a single layer system.
  • 30 minutes of fire resistance from a single layer system.
  • Score and snap installation, the same as standard plasterboard.



Key Specification
  • Available in 12.5 mm and 15 mm thickness.
  • Sound resistance 12.5 mm  = 45RwdB  15 mm = 46RwdB .
  • Fire resistance 30 minutes for both 12.5 mm and 15 mm boards.


Our product
Show more Show less Fire protection

Overview

GTEC FireBoard is stronger, harder and heavier than Standard plasterboard and has superior fire resistance, sound insulation and impact resistance in GTEC Drywall Systems.

Several of our other performance boards also have fire resistance properties. Check products below for information on the best board for your specific project.

Installation:

  • Dot and Dab
  • Drylining 
  • Metal stud or timber partition

Advantages

  • 60 minutes fire resistance from a 15mm single layer system.
  • Twice the protection before the wall is breached compared to standard board.
  • Achieves Part B building regulations (fire).
  • Suitable for stud partitions, wall lining and suspended ceiling systems.

Key Specifications:

  • Available in 12.5 mm and 15 mm
  • Thermal Resistance: R: 12.5 mm = 0.05 m2 K/W,  15.0 mm = 0.06 m2 K/W
  • Fire Board can be jointed and finished with Siniat Jointing systems.
  • The boards require priming with GTEC Universal Sealer prior to decorating.
Our product

Case study: Bedroom

We recognise the importance of quality and comfort in your home – and this is where our products can make a real difference. Our specialist products are an investment for the future, what’s on the inside of your property is as important as what’s on the outside.

Siniat Board Finishing
Bedroom case study 2
Bedroom case study 3
Siniat Solutions Residential Builder Phillip Cannon

Phillip Canon,
Builder, Manchester, UK

“Over recent years, many homeowners have invested in better insulation without realising the knock-on effect this can have on creating condensation. When warm moist air gets trapped behind the insulation, it can condense on and inside the wall - which leads to damp and mould.

I use Vapour Board to get over this hurdle. It has a metallised vapour control layer on the back face to help prevent the internal warm moist air from permeating into the wall structure and thus prevent damage.”

Supporting Tools, Tips and Information

HOW TO - Fit Thermal Board
Siniat Thermal Board Video image
How To - install a sound barrier video
Siniat dB Board video image
HOW TO Video - Build a Metal Stud Wall
HOW TO - Build Metal Stud Wall
Technical Services
Technical image

The Siniat highly trained Technical Services is available to answer any technical queries you have and advise on installation details to system specifications to improve Fire, Sound and Thermal performance. Call: 01275 377 789 Email: technical.siniat@etexbp.co.uk

Find a stockist near you