Go to:

GTEC Performance Self Tapping

For use with the Siniat GTEC Performance Boards.


  • For use with thin gauge metal studwork (under 0.7mm thick)
  • Used to attached Siniat Performance boards such as GTEC La Dura, Megadeco and Universal boards to metal studs
  • Fine threaded screw
  • Phillips head
  • Carbon steel screws with Zinc Coating
  • Manufactrured to BS EN 14566


Used to fix a wide variety of GTEC Boards to metal studs. Please note the below when using GTEC Performance Self Tapping Screws:

  • Screws to be located a minimum of 10mm from bound edges and 13mm from cut edges
  • Screw location to be a minimum of 3mm from the edge of the metal stud
  • Screw depth into the metal stud must be a minimum of 10mm

Practical support from our technical experts

Technical support: Design stage
Technical Support at Design Stage
Technical support: On-site
Technical Support On Site