Go to:

GTEC Drywall Screw Self Drilling

GTEC Drywall Screw Self Drilling for attaching plasterboard to thick gauge GTEC metal.


  • For use with thick gauge metal studwork (over 0.7mm thick)
  • Fine threaded screw
  • Phillips head
  • Carbon steel screws with Zinc Coating
  • Manufactrured to BS EN 14566


Used to fix a wide variety of GTEC Boards to metal studs. Please note the below when using GTEC Self Drilling Screws:

  • Screws to be located a minimum of 10mm from bound edges and 13mm from cut edges
  • Screw location to be a minimum of 3mm from the edge of the metal stud
  • Screw depth into the metal stud must be a minimum of 10mm

Practical support from our technical experts

Technical support: Design stage
Technical Support at Design Stage
Technical support: On-site
Technical Support On Site